Bmw Winkfp Programming
Bmw Winkfp Change Vin
Bmw Winkfp Error 211

Description

Inpa software collection does conflict with some other diagnostic software like Vida Dice (Volvo) etc.

Tried WinKFP 5.1.0 in XP Mode to no avail. Tried installing WinKFP 5.3.1 (bundled with BMW Standard Tools 2.12), program wouldn't start. Finally took the risk to install WinKFP 5.3.1 in native Windows 7 64-bit, everything worked out just fine. I wouldn't recommend doing it in a 64-bit OS because on the WinKFP window it clearly says '32-bit. WinKFP 5.3.1 - Integrated SP-DATEN v53.3 - BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available. How to flash E-series CIC to V41 and get BMW Apps without FSC: Prequisities: You must know how to use WinKFP. You also must have some knowledge about WinKFP expert mode. A BMW iDrive software update can help improve software compatibility, but won't change your iDrive interface. If you'd like to learn more about the process and whether it is the right option for you,contact our team to discuss your needs. Charging your BMW's battery when updating iDrive software. (Solved) ICOM WinKFP cannot update ZB number BMW Programming: ISTA-P vs WinKFP vs E-sys Obdstar X300 DP Plus Configuration A vs Configuration B vs Configuration C.

So to avoid software miss-function, working Virtualbox image was created.

All the software and tools you might need for coding and flashing a BMW, are pre installed and configured in a Virtualbox image. Works with a K+Dcan cable – INPA, NCS Expert + NCS Dummy, WinKFP, EDIABAS, ToolSet 32, BMW Coding tool, NavCoder, BMW PassThru Tool + iToolRadar + EasyConnect for connecting with other cables (ICOM, Ethernet, etc.)

Versions:

Inpa 5.0.6
EDIABAS 7.3.0
NCS Expert 4.0.1 (pass: repxet)
NCS Dummy 0.6.0.7
Tool32 4.0.3
WinKFP 5.3.1
SP-DATEN 53.3
BMW Coding Tool 2.5.0
Dr.Gini – 2014
NavCoder 2.9.183
BMW PassThru Tool

All the posible K+Dcan USB drivers are available through the shortcut on the Desktop (USB Drivers) – for maximum compatibility with chineese noname ones try the OriginalCable subdirectory or FakeCable

All the software comes with english interface and pre configured USB K+Dcan cable.
For coding – use the included BMW Coding tool and get SPDATEN from the internet. To share a folder from your host machine (eg. your Downloads folder where the SPDATEN probably will end up) – Machine > Settings option in a virtual machine’s window and select Shared Folders. There are two types of shared folders — Machine Folders are permanent folders that will be shared until you remove them, while Transient Folders are temporary and will be removed when the virtual machine restarts or shuts down. Click the Add button or right-click in the list and select Add Shared Folder to add a new shared folder. The folder path is the location of the shared folder on your host operating system, while the name is how it will appear inside the guest operating system. Because this is Windows XP – to access the shared folder – right click on My Computer > Explore, from there click on the expand icon (+) right next to My Network Places and you should be able to see VirtualBox Shared Folders.
To use with ICOM – change the Network adapter from NAT to Bridged with your LAN card.
Settings > Network > Adapter 1 (currently NAT) goes into Bridged mode or if you still want Internet connection in the VM, add another one – Adapter 2 (Bridged) and leave adapter 1 as it is.

Size: ~ 3.83 GB

You will get 2 Virtualbox images

Supported moddels: E31, E34, E36, E38, E39, E46, E52, E53, E60, E65, E70, E83, E85, E87, E90, F01, F02, F07, F010, F011, F025, F30

Here is the guide on “how to”, for more information please refer to https://www.virtualbox.org/

Installation method:

Download Virtualbox and its extention pack and install it.
Open Virtualbox, go to “Machine” and press “Add”
Navigate to the software location and highlight the Blue color file (you can ignore the name) and press “open”
Go to Virtualbox, highlight the image and press “Start”

Installation method 2:

Download the [BMW] [BMW] INPA WinKFP NCSExpert .ova or .vmdk file (virtual machine)
In VirtualBox – File=>Import Virtual appliance
Choose the downloaded OVA or VMDK file and on the next step tick “Reinitialize the MAC address of all network cards”
Start the Virtual Machine
Next step – plug the K+Dcan cable, start the virtual machine and transfer it to it – from the menu – Devices>USB choose your cable (usually something that has 600 in the name, but probably you’ll know which one is it…)
In the VM – right click on My Computer=>Manage=>Device Manager and check whether the cable is correctly isntalled – Ports (COM & LPT) – USB Serial port must be on COM1. If else – follow the readme instructions and use the drivers from the OriginalCable folder.

This VM is for VirtualBox. It is not convertable to VMWare and it would not work. If you are getting blue screen of death – the problem is with your installation not with the image. Try it on something else and follow the provided instructions strictly!

It’s an excellent write-up: Flash e-series CIC to v41 software, BMW Apps without FSC

This is for ECE/US CIC, not for Asian variants.

How to flash E-series CIC to V41 and get BMW Apps without FSC:

Prequisities: You must know how to use WinKFP. You also must have some knowledge about WinKFP expert mode. Interface must be ICOM A + B(or OP(P)S). No matter what you read from internet or hear from someone else, K+DCAN cable can not be used. Do not even try, it will fail for sure.Also your Ediabas must have all files for flashing modules. There is no need for WinKFP ecu-files. I recommend you to download (v41 or post) sp-daten and do “update sp-daten” with bmw coding tool.

Update must be done module by module. Correct order is 63, 62, A0. All modules can be flashed with MOST_ASYNC_ab625.

Download included package and extract it. CIC has three modules: 63, 62 and A0. 63 and A0 is the same for all chassis models so there is just one folder for each. 62 (gateway) has a different software for every chassis model so correct folder must be chosen. Chassis models are E60 (including E60, E61, E62, E63), E89 (including E8x and E9x) and E70 (including E70 and E71). Choose correct folder for 62.

Copy three folders (develop_63, develop_62_exx, develop_a0) to c:ec-appsnfsdata

There are three modules to flash. 63 is the first one. Go to c:ec-appsnfsdata and rename “develop_63” to “develop”.

63:

-Configure ICOM for MOST_ASYNC_ab625
-Open WinKFP
-Select expert mode
-PABD = 08010408CI63F1.ipo (be carefully, do not choose CM63)
-P-SGBD = 33CI63F1_10.prg (be carefully, do not choose CM63)
-ECU-adress = 63
-Data = A9257174
-Program = 9257170
-NAAB = H020270_0202J5

WinKFP will complain about incorrect files and other things when you select the files, just ignore the complaints.

Now select done and you will get back to main menu. Now everything is ready for flash (also you have power supply connected, ignition on and cd/dvd removed from CIC). At this point you can turn on windows task manager (taskmgr.exe) because WinKFP progress meter will not work when flashing cic. Select “Program NAAB” and bootloader flash starts. CIC goes to bootloader mode and fan spins at full speed, this is normal. Screen shows bootloader picture or turns black, depending on old firmware version. Now you must be patient because the meter is not working. It will go to 100% and do all kind of things, just wait until “bootsector update finished” appears. Next select program program. Same precautions for this, it takes around 30 minutes to flash 63 program. After program programming has finished, select program data.

62:

Now you have flashed 63. Next you must flash 62. Go to c:ec-appsnfsdata and delete develop folder. Then rename develop_62_exx to develop. Go back to list on 63: on this guide. Configure WinKFP just like on that list, except change three bolded 63’s to 62. Also select new data, program and NAAB files. If you did the folder swap (delete develop folder, rename develop_62_exx -> develop) correctly, there are just the correct files

Bmw Winkfp